Control station panel CSP
The abbreviation CSP means the control station panel. The main purpose of the CSP by "Teplovye Sistemi Llc" is to participate in automated power supply control systems for industrial-scale facilities: oil complexes, gas production plants, and even nuclear power plants.
SCP, as a low-voltage complete device, can function both independently and as a part of the system. The possibility of using block circuits greatly simplifies the process of operation, service and repair of equipment. It is possible both to purchase ready-made devices and individual ones.
With the help of such low-voltage complete devices, the power supply of production machines and mechanisms, electrical installations and power equipment is controlled. Thanks to communication with the APCE, which supports the possibility of remote control using software and touch monitors specially developed by the company, the CSP is able to process data and monitor the state of the serviced object.
Design and operating concept of CSP
КDesign and operating concept of CSP
Like the most low-voltage complete devices, the CSP can be made in a single-cabinet or multi-cabinet version. Cabinets usually consist of several sections (usually 4-5). To complete the CSP we use cabinets of only reliable and well-proven brands: Rittal, DKC. The cabinets are made of sheet steel and have more than 15 sizes, which ensures the possibility of individual configuration. The symmetrical profile of the cabinets allows you to save space inside. It is possible to connect both from above and from below. Cabinets of these brands are installed at many important strategic and industrial facilities, such as: "Vostochny" cosmodrome, "South Stream" gas pipeline compressor station, Rosneft "Achinsk Refinery", Olympic facilities in Sochi, Moscow Metro.
Here are the main advantages thanks to which our CSP is especially profitable for operation:
-
Degree of dust and moisture protection from ip21- to ip54
It is possible to set up a heated cabinet for installation outside (???)
It is possible to set up cabinets with different controllers of control systems (heating, power supply, etc.)
Floor and wall options are possible
The sections themselves have starters and start-regulating devices installed. If the cabinet includes modular elements, its operation is greatly simplified, since it is possible to turn off and replace a specific module. And at this time, the effective work of both the cabinet itself and the devices connected to it continues. Multi-cabinet panels are a set of cabinets.
Package and functions of CSP
The main task of the control station panel is to accept electricity and control its distribution. With the help of such panels, electricity consumers are selected and reserved. As a result of this selection, it becomes much easier to prevent power outages. And the possibility of remote control brings additional convenience to operation.
Usually, the CSP includes one or more cabinets and the panels are mounted on the floor or wall. The cabinets are equipped with an access blocking system, which increases the safety of their use. The dimensions of the panels depend solely on the tasks that they must perform. For severe climatic conditions with low temperature, it is allowed to manufacture panels with heating system.
Reliable protection of control station cabinets prevents the risk of an emergency, which is especially important for industrial or production facilities. The equipment is also protected from failures and unauthorized access to the control system, which ensures a high level of safety of working personnel.
The standard package of the CSP includes the following elements:
-
Automatic load transfer equipment
Switchgear
Electrical installation control unit
Drive control unit
Starting device
Measuring device
Alarm system
Principle of operation of CSP elements
CSP allows you to quickly resume the supply of electricity to controlled facilities in case of a failure. Emergency restoration of the power supply is performed using ATCB unit, which turns on the operation of the emergency power supply if the main one fails. The distribution unit distributes electricity to sources of consumption. In this case, the outputs are protected from overload and short circuits.
Other units and modules (automation units, frequency converters, start-up protection devices) perform no less important functions. With their help it is possible to turn on/off the asynchronous motor and adjust its speed both on site and using remote control.
